|
The solution
MULTILIGHT provides standardised lighting conditions for visual colour-matching – independent of the time of day or the season. MULTILIGHT is a modern colour-matching booth with which reproducible results acc. to DIN, ISO, ASTM, BS, CIE, M & S etc., are achieved, accomplishing quality assurance within the tolerances agreed between the customer and the manufacturer.
Our product range
MULTILIGHT is available in two different chamber widths
- 460 mm - ( ML 1)
- 460 mm - ( ML 1) ( Portable )
- 600 mm– (ML 2) and
- 1,500 mm– (ML 5), with up to five illuminants, depending on the model.
- Artificial daylight – D 65, D 75, D 50,
- Department store lighting TL 84 ,
- Dusk A,
- UV light,
- CWF, WWF light, or as specified by the customer.
- Special electronics make it possible to switch between the illuminants – without any warming-up, flickering or flashing. The full colour temperature is on hand immediately, greatly simplifying the colour-matching process. The burning life of the lamps is monitored by a time-meter. The recommended burning life is 2,000 hours. The MULTILIGHT comes in neutral colouring as prescribed in the relevant standard. An additional light-scattering panel can be inserted below the light source. Our colour-testing booths are available in table-top or suspended versions.
-
Modell ML ( )
|
ML 1 T
|
ML 2 T
|
ML2 H
|
ML 5 T
|
ML5 H
|
Dimension WxDxHmm
|
520x340x460
|
650x550x600
|
650x550x120
|
1.570x550x600
|
1.570x550x120
|
Weight KG
|
10 KG
|
25 KG
|
20 KG
|
60 KG
|
36 KG
|
|
Technical specifications :
- TABLE-TOP MODEL (T) SUSPENDED MODEL (H)
-
Type No.:
|
Illuminant / Lighting Apparatus
|
ML ( ) DT ( D )
|
Artificial daylight (D 65) – 6500° Kelvin – (4 x 20 Watt – ML2/ 4 x 60 Watt- ML5)
|
( T )
|
Light bulb (A) – 2850° Kelvin – (4 x 40 Watt- ML 2/ 8 x 60 Watt- ML 5)
|
ML ( ) DTX ( X )
|
Department store lighting (TL 84) – 4000° Kelvin- (2 x 20 Watt- ML 2/ 2 x 60 Watt- ML 5)
|
ML ( ) DTXU ( U )
|
Ultra-violet (UV). Certificate for optical brighteners. (1 x 18 Watt- ML2/ 1 x 36 Watt- ML 5 )
|
ML ( ) DTXU – S
|
Fifth illuminant as specified by customer – e.g. D 50, D 75, CWF, WWF, etc.
|
|
This illuminant can be installed instead of D or X.
|
|
- Other illuminants / type variants made to customer’s specifications on request!
- Counter for operating hours: Electronic, digital time meter for monitoring the burning life.
- Mains connection: 230 VAC, 50 Hz, 1.2 Amp., temp. control, inlet connector for non-heating apparatus, starter-less operations, components acc. to VDE
- Standards: DIN 53218- 6172- 6173, ASTM D 1729- D 344, BS 950, Marks & Spencer
- Paint finish: Upper part: dark grey; Test chamber: neutral grey RAL 7035
- Delivery form: Flat-pack carton. Test chamber assembled by manufacturer
- Research
- Production
- Laboratory
- Various fields of industry: Automotive, chemical, dental, printing; paints, varnishes and coatings, wood, ceramics, leather, food processing, paper, pigments, soaps and detergents, greases and oils, packaging, and many others.
MULTILIGHT SL colour-matching lamp
In contrast to the MULTILIGHT ML colour-matching booth, the MULTILIGHT colour-matching lamp is equipped with only one type of illuminant. There are four fluorescent lamps (light source as selected by customer, e.g. D50, D65, etc.) to choose from. The illuminated area is covered with a light-scattering panel.
The MULTILIGHT SL is available as a SUSPENSION LAMP for hanging from the ceiling or as a TABLE-TOP VERSION fitted with levelling feet.
Technical Data:
- Housing dimensions: (W x D x H mm) 800 x 320 x 120
- Illuminated area: (W x D mm) 600 x 250
- Lamps: 4 units à 20 Watt - HF starter
- Light sources: Daylight D 65 or D 50 (please specify when ordering)
- Weight: 10 kg.
- Paint finish: Powder coated in RAL 9002
- Suspension lamp for fastening to the ceiling:
- Table-top lamp with two levelling adjustable feet (black):
- ACCESSORIES for colour-matching:
Spare lamp set:
- for ML 2 – 11 pcs. lamps Ref ML 2 EL
- for ML 5 – 15 pcs. lamps Ref ML 5 EL
- Lamps can be supplied individually on request!
- LUXMETER device for measuring luminous intensity
- Electronic luminance meter with three measuring ranges between 0 and 50,000 lux for inspection by daylight, artificial light. Measured value memory. Zero calibration, standard measure zero point. Display in lux / FC.
- Ref.: SLT 01.07
- Scattered light panel
- Scattered light panel for specimens with dark, high-gloss finish
- Complete with bracket for ML 2 (600 mm) or ML 5 (1,500 mm)
- Ref ML 2 S Ref ML 5 S
..... when colour and GLOSS unite
The innovative Multi-angle Inspection Table (MIT 1001) was developed specifically for visual colour-matching on SPECIAL-EFFECT SURFACES; e.g. metallic, pearlescent, structured, etc., in fact wherever finishes with a gloss effect are to be tested.
This 3-D test table functions on the principle of a goniophotometer which can be moved in all degrees of freedom by means of a scaled pivot device. Colour differences and flop effects are precisely defined and can be read off digitally with an accuracy of < one degree. An adjustable eyepiece focuses the tester’s eye below 45°. The MIT inspection table can be set up in all standard colour-matching booths.
Colour-matching inspection table MIT 1001
Test table with 45° eyepiece – adjustable, rotating, slewable test bench. Pivot with scale, magnetic holding strips on test bench.
- Dimensions : Base plate W x D x H - 400 x 400 x 30
- Test bench : 400 x 200 x 15
- Paint finish: Munsell grey
- Weight: 13 kg
Colour-matching table MIT 1001/ F
- Inspection table as above, but with fixed angles acc. to VW, OPEL; HERBERTS standards
- Fixed angle : 80, 60, 45, 35, 30, 0, 110 – VW , 122 ° - GM/Opel
Colour-matching table 45 degrees
- Basic inspection table – Aluminium with 45° viewing angle (not illustrated)
other models
Colour Vision Test Box – CVT (230 V AC – 50 Hz.)
Portable colour identification device “CE”, supplied in an aluminium / steel sheet case
230 V AC, 50 Hz- 30 Watt, 270 lux acc. to DIN VDE, EN, UL, comprising:
|